THERMOFLOW TF8018 —— Precision Temperature Cycling System
Standard features include:
– Touch screen controller
– Mechanical refrigeration. No LN2 or CO2 requried
– 4 to 18 SCFM adjustable air flow rate(output)
– Temperature range: -80℃~225℃
– Accuracy: ±1℃
– Setability: 0.1℃
– Indication: 0.1℃
– 55 ℃ to + 125 ℃ about 10 seconds
– Defrosting design, rapid removal of internal water vapor accumulation
– Control model: AIR or DUT
– Operation mode: Manual or Program
– Thermocouples: Type T & K
– Interface: RS-232, LAN; (Optional: IEEE.488)
– USB stick datalogging capabilities
– Easy Lockable Caster
– Motorized cylinder with pneumatic head lift
Utility Requirements :
1) Electrical: 220V / 50Hz, 1 phase @ 30Amps
2) Compress air:
– Input air pressure:90~110 PSI(0.62 ~ 0.76Mpa)
– Input air flow:18~25 SCFM (507~ 705 L / Minute)
– Oil Content: < 0.10 ppm by weight and filtered to ≤0.5um oil contaminants
– Input Air Dewpoint:≤ 10℃ @ 0.62Mpa(90PSI ); Clean gas with pressure dew point less than – 20 ℃ is recommended.
– Air supply line should be at least 1/2″ ID.
Environmental requirements
-Ambient temperature range: +10℃ to +28℃.
-Relative humidity: 5% to 85% RH, 45% nominal.